# 10′ X 10′ Slab – How Many Bags of Concrete Do I Need? Easy Answer

## Information about 10′ X 10′ Slab – How Many Bags of Concrete Do I Need? Easy Answer The amount of concrete I used for this 10 ‘x 10’ slab was 2 meters.

First, here’s how many feet of concrete you will need to make a 10×10 slab, depending on how thick it is.

The amount of concrete you will need for a 4 by 10 cm slab is 1 cubic meter.

• A four by four inch slab requires 1.25 cubic meters or (56) 80 pound bags of concrete
• A four by four inch slab requires 1.6 cubic meters or (72) 80 pound bags of concrete
• A four by four inch slab requires 1.85 cubic meters or (84) 80 pound bags of concrete
• A four by four inch slab takes 2.2 cubic meters or (99) 80 pound bags of concrete
• A four by four inch slab takes 2.5 cubic meters or (113) 80 pound bags of concrete

## how many bags of concrete are there in a garden?

The table below shows you how many bags of concrete you will need to build a yard based on the size of the bagged concrete.

It is best to use 80 pound concrete bags so you don’t have to handle and mix as many bags. The thickness of your 10 ‘x 10’ board will determine how many pockets you will need.

The average thickness of a 10 ‘by 10’ slab of concrete for a shed is 4 inches thick.

At 4 “thick, your 10×10 slab will hold 56 bags of concrete weighing 80 pounds. ## The formula for calculating concrete for a 10 x 10 slab

The formula I use to calculate meters of concrete for a 10 ‘x 10’ slab is:

Length x Width x Thickness ÷ 27 (all dimensions should be in feet)

I’m going to use a 4 inch thick plate as an example.

First I calculate the square meters: 10 x 10 = 100 square meters

Second, I calculate the cubic meters by multiplying the square feet by the thickness 100 x 0.33 = 33 cubic feet. (a 4 “thick plate equals 0.33 feet) 4” ÷ 12 “= 0.33 feet

Third, I’ll divide the cubic meters by 27 to get cubic meters (33 ÷ 27 = 1.22 cubic meters).

The number 27 indicates how many cubic feet a cubic meter is. (3x3x3 = 27)

• For a 3 “thick slab, use 0.25 as the thickness
• For a 5 “thick slab, use .42 for the thickness
• For a 6 “thick slab, use 0.5 as the thickness

## How to mix bagged concrete for a 10 ‘x 10’ slab

In a wheelbarrow:

Most concrete sacks require about 4 to 5 liters of water to mix for each sack.

Put the water in the wheelbarrow first, then pour it in half of the bag and mix.

After half of the bag is mixed, add the other half and finish mixing.

It’s best to use a hoe to mix the bagged concrete in a wheelbarrow.

For best results, be sure to read the mixing instructions on the bag. In a bucket:

Using a 10 or 20 gallon mixer bucket works best.

First add the recommended water, then add half of the bag and mix well.

Add the other half and continue mixing for a few minutes until all of the concrete is evenly mixed.

Using an electric drill makes this task much easier. In an electric mixer:

You should be able to mix 2 bags at a time if the blender is big enough.

First put the recommended water per bag in the blender.

Add 1 sachet and mix for a minute then add the second sachet and mix for a few minutes until the concrete is evenly mixed.

After mixing, pour the concrete into a wheelbarrow to transport it to your slab. ## What type of bagged concrete is best for a 10 ‘x 10’ slab?

The best type of bagged concrete mix for a 10×10 slab is 4000 psi or 5000 psi mix.

I like to use Sakrete High Strength Concrete Mix which is a 4000 psi mix or I use Sakrete 5000 Plus High Strength Concrete Mix if available.

The 5000 psi mix is ​​a bit easier to work with as it has more cement paste in it, but both are good.

Both can be bought in 80 pound bags

How many square meters does a bag of concrete cover?

Another way to share everything through -concrete.com