How Do I Determine The Right Furnace For My Home?

Amazing! How Do I Determine The Right Furnace For My Home?

Information about How Do I Determine The Right Furnace For My Home?

Phil Puccio

Professional installation of a gas stove

When it’s cold outside (even in LA), you need the right stove to heat your home evenly and efficiently. A stove can only do its job properly if it is the right size for the room it is heating. Too big and it turns on and off a lot, too small and it runs all the time. Neither is ideal.

A small furnace results in high energy costs, uneven heating and a shorter lifespan. Not to mention, you will likely still be cold. However, a stove that is too large can make parts of your home uncomfortably hot while other areas are not properly heated. That constant cycling in short bursts could wear it out quickly. To avoid these problems, learn how to choose the right stove for your home.

How do I determine the correct size stove for my home?

Gas stoves differ in their BTU capabilities. BTU stands for British Thermal Units. A BTU represents the amount of energy it takes to heat a pound of water by one degree Fahrenheit. To determine the correct BTU to use for your. require Heating the house, you have to do a little math.

First, determine the square footage of your home.

You should find this number on the paperwork that you received when you bought your home. If you can’t find that, you can calculate the square footage yourself.

Start by measuring the length and width of every room in your home. Multiply the length and width of each room together to get the square footage of that room. Then just add up the square footage of all of your rooms.

Do not consider rooms without air ducts or rooms that you do not want to heat, such as garages or conservatories. Most stove size charts assume your ceilings are eight feet high. If your caps are higher or lower, modify your calculation accordingly.

Determine in which climatic zone you live.

The United States is divided into several Climates, each with their own BTU per square foot recommendation. It takes more BTUs to heat a house in Minnesota than a house in Florida. If you live in California your oven doesn’t have to be heavy.

When you work with Mike Diamond, your home is in Zone 2 – a hot-dry or mixed-dry climate zone. In Zone 2, you will need 35-40 BTUs for every square foot of your home.

Calculate the required furnace size.

To determine the number of BTUs you will need to heat your home: multiply your square footage by the zone heating factor. If your home is well insulated, use the lower number. If your home is not well insulated or has other factors that make it difficult to heat, use the higher number.

For example, in a well-insulated LA house that is 2,000 square feet, our equation is:

2,000 (sq ft) x 35 (zone factor) = 70,000 BTUs

For this house we need to install a stove with a capacity of 70,000 BTUs. But we still have one more step to take to find our perfect stove.

Calculate the real performance of your new oven.

When you buy your new oven, you will notice two numbers. The first is the amount of heat produced in BTUs. The second number is the efficiency rating. To calculate the actual BTU performance of an oven, multiply the two numbers. For example, a stove with a capacity of 100,000 BTUs at 80% efficiency actually generates 80,000 BTUs of heat:

100,000 x 80% = 80,000

Make sure you calculate this correctly before installing a stove that is too small for your space.

Refer to an oven size chart.

You can also compare your home’s square footage with a stove size chart. There are a number of different oven size charts. These graphs provide comparisons between living space and the BTUs needed for heating. It’s not as accurate as calculating it yourself. Most of the diagrams follow similar guidelines:

  • A 1,200 square foot home uses between 35,000 and 75,000 BTUs
  • A 1,500 square foot home uses between 45,000 and 90,000 BTUs
  • A 1,800 square foot home uses between 55,000 and 110,000 BTUs
  • A 2,100 square foot home uses between 65,000 and 125,000 BTUs
  • A 2,400 square foot home uses between 75,000 and 145,000 BTUs

Expert oven service and installation in Los Angeles

If you are interested in updating or upgrading your home’s stove, call Mike Diamond. Our skilled technicians can answer your questions about the make, model and size of the perfect stove for your home. We install the right furnace quickly and efficiently.

Breaking Story – How Do I Determine The Right Furnace For My Home?

The Latest News on How Do I Determine The Right Furnace For My Home?

Original Source:
Category – Plumbing

© 2022 - WordPress Theme by WPEnjoy