How to Clean Stamped Concrete

Amazing! How to Clean Stamped Concrete

Information about How to Clean Stamped Concrete

Phil Puccio

Stamped concrete is a popular choice for driveways, sidewalks and patios due to its durability and aesthetics.

However, like any other concrete, it can become stained and dirty over time—especially if you live in an area that’s prone to bad weather or has a lot of traffic.

Here are some of the top tips for cleaning stamped concrete. These methods will help you keep your concrete looking its best for years to come.


Fortunately, stamped concrete is relatively easy to clean. It starts with a regular sweeping and spritzing with water to keep dirt and debris from building up.

Thorough cleaning involves flushing the concrete with a high-pressure hose attachment, scrubbing with water and dish soap, using a broom to get into the grooves, and hose-rinsing the surface again to remove the soap residue.

For deeper, harder-to-clean stains, you’ll need to use a low-speed pressure washer. Setting the pressure too high can damage the texture and seal.

When to apply or reapply sealant to stamped concrete

Your tamped concrete should have been sealed when first installed.

After that, we recommend resealing it every two or three years, depending on the environmental factors in your area and how quickly it loses its luster or begins to look dull.

To apply sealant, you should first thoroughly clean the concrete. Once dry, apply the sealer in 2-4 square foot increments. After the sealer has set, apply a second coat.

Sealer makes your concrete easier to clean and most importantly acts as a barrier against stains such as oil, grease, chemicals and dirt.

Not to mention, adding a layer of sealer will also protect your concrete from the sun’s UV rays and keep its vibrant color and design for years to come.

Applying sealant is a key factor in keeping your concrete stain-resistant — but not the only one.

Don’t rely on the seal alone to prevent stains.

Instead, clean your tamped concrete as soon as grease, oil, or other stains come in contact with it, and sweep regularly to remove dirt and debris. For more specific tips and tricks, Check out the Port Aggregates blog.

Breaking Story – How to Clean Stamped Concrete

The Latest News on How to Clean Stamped Concrete

Original Source:
Category – Concrete

© 2022 - WordPress Theme by WPEnjoy