Amazing! How to Tell When it’s Time for a New Toilet
Information about How to Tell When it’s Time for a New Toilet
The toilet is the most dependent plumbing fixture in the home. In fact, it wouldn’t be an exaggeration to name it the main facility. Since its performance is usually so reliable, it’s easy to assume that your toilet will last forever. However, like everything else, toilets have a limited lifespan – and it is a great advantage to recognize the warning signs that indicate a new toilet to avoid a nasty surprise.
While our team of State-certified master plumber at Adam and Son plumbing can handle any plumbing emergency (or Plumergenciesas we call them) we prefer to help people keep their pipes and fittings in good condition in order to avoid unnecessary costs – not to mention unsanitary pollution and water damage!
The toilet is the workhorse of the house
Not to be rude, but residential toilets are subjected to tough training every day. According to the statistics, the average person flushes the toilet five times a day – although this seems like an underestimation. While most homes have more than one toilet, the use of each facility takes its toll over time. Toilets can hold up 50 years under typical conditions, but the main factor in determining the life of a toilet is how many people use it and how often it is flushed. A large household can expect to replace at least one toilet well sooner than in half a century.
Also take into account changing lifestyle patterns. As work from home becomes more and more common – and perhaps will remain – adults are no longer away eight hours a day. The same applies to schoolchildren who learn from a distance. A higher demand leads to a higher wear and tear on a toilet.
When should one take the workhorse out to pasture?
It can be difficult to tell when a toilet is nearing the end of its useful life. Since it is a relatively uncomplicated device, simple repairs and the replacement of parts can also be carried out successfully by people with very rudimentary DIY skills. Many are confident they can replace a worn flap valve – the number one cause of a spontaneously filling toilet tank – or replace the “guts” that include the flap valve and fill valve.
In most cases, these fixes will solve the problem and your toilet will continue to function reliably for years to come. But watch out for signs that it is time to take the workhorse out to pasture! We thank our colleagues at Talmich plumbing and heating for the following helpful information.
The tank has cracks – A puddle that forms around the toilet floor could indicate cracks in the tank. You can start your own inspection. Examine both the inside and the outside of the tank. The location of the crack determines whether a repair is sufficient. If it’s below the waterline, you may need to swap out a toilet tank. At this point, most homeowners will replace the entire toilet as it is more cost effective. Remember, tank cracks aren’t always visible – especially if it’s a hairline crack. If you can’t find a visible crack, call a plumber for a thorough inspection.
The toilet is leaking – Unlike pool water which leads you to a cracked tank, toilet leaks are not easy to spot. A leak can go unnoticed for several months. Even if you may not see the water for yourself, watch out for a sudden spike in your water bill. Like our blog post – “Is your toilet causing your water bill to overflow?? “- covers, an undetected leak can be run up your water bill and damage the surrounding soil and / or subsoil – and waste a valuable resource. Depending on the source of the leak, the water can also be contaminated, creating a health hazard. Here, too, replacing the toilet is the more cost-effective solution.
The toilet often clogs – For example, suppose young members of your household don’t wash up toys (or worse, Orbeez water pearls) in the toilet, frequent use of the plunger is another problem sign. Before you blame the toilet, however, make sure you’re not flushing items that shouldn’t be flushed – like baby wipes, handkerchiefs, paper towels, cotton swabs, feminine hygiene products, etc.
Our blog post – “It’s 4 0’Clog! Here are the top 4 causes of clogged toilets”- covers other possible causes of toilet blockages. Tree leaves, sticks, and animal nests can block your plumbing and prevent air from getting into your plumbing, resulting in clogging of the toilet and low pressure flushing. Tree roots are another factor as they can block or reduce the flow of water, cause sewage to overflow, or damage pipes. Blocked sewers are also a possible cause – and a major health problem, as they contain bacteria and many other toxic substances.
In addition, first generation models of low-flush toilets are prone to clogging due to insufficient water pressure to remove waste down the drains. Ultimately, the only way to determine the cause of common constipation is to call a plumber.
The toilet needs frequent repairs – As mentioned earlier, your toilet is not a complicated piece of equipment, but still consists of several parts. Most toilets do not need to be replaced with all parts at the same time. However, you should consider the cost of parts and your time. If you spend at least one weekend a month doing DIY – or calling a plumber frequently – replacing it is cheaper and gives you a trouble-free light that you can count on for years to come.
Your toilet is old and does not save water – Although toilets have a nearly human lifespan, consider replacing an old model that doesn’t use water efficiently. Under the Energy Policy Act of 1992, toilets installed after 1994 must have a flush volume of 1.6 gallons per flush (gpf). Many older toilets that are still in use today have flush volumes of 3.5 gpf and up to 5.0 gpf. If saving money and water is important to you, replacing your old, water-guzzling water closet is a good idea. Look for an EPA WaterSense-marked toiletwhich can save you more than $ 110 in water bills every year – which adds up to $ 2,200 over the life of the toilet. Which leads to our next section.
What to look for in a new toilet
A great advantage of recognizing a worn toilet is the luxury of having time when buying a new model. If you don’t have to change your toilet in an emergency, you can choose the style and features that best suit your bathroom – and your personal comfort preferences. Atlanta real estate agent Rosanne Dorfman offers the following list of what to look for in a new toilet.
Take the water consumption into account – Different toilet models have different flush options. As mentioned earlier, today’s standard toilets use a maximum of 1.6 gallons per flush. Low flush toilets can only use 1.28 gallons. While often more expensive to install and maintain than traditional toilet faucets, low-flush models can also save you a lot of money over time. Since the bathroom is the most frequently used room in the household and the toilet is the largest consumer of water, choosing a new toilet carefully pays off in the long run.
One-piece or two-piece – If the toilet and tank are seamlessly fused together, it is called a one-piece (or one-piece) toilet. If the toilet and tank are separate and connected with fittings, one speaks of a two-part (or coupled) toilet. Since a one-piece model is easier to clean, it is recommended for families with young children. It’s also more elegant and stylish, which makes it a great choice for those looking to upgrade their bathroom during the remodel. Because of this, it’s also a little more expensive than the traditional two-piece model.
Measure the size before buying – The hole the toilet will be mounted over and the distance from the wall to the center of the hole is called the rough-in. This spacing is 10, 12, or 14 inches. Before you go out to buy a new toilet, take the rough measure to make sure it will fit.
Do it yourself or hire a plumber?
Some people have hands-on experience remodeling and renovating homes and feel comfortable and confident that they can replace a toilet. However, this is not a job for those who take home renovation inspiration from TV shows or YouTube videos. Most Repairs and replacement of sanitary facilities must be carried out by a specialist. Even if you have do-it-yourself experience, unexpected problems can arise that could result in damage or uncover a situation that requires more repairs than you expected.
If you are looking for a reliable and professional plumber, look no further than Adam and Son plumbing. We react quickly and efficiently, thus preventing further damage and future repairs. We are also one of the few companies that sends a state-certified master plumber every time. Check out our full list of services, or contact us request an appointment. We look forward to you!
Breaking Story – How to Tell When it’s Time for a New Toilet
The Latest News on How to Tell When it’s Time for a New Toilet
Original Source: https://www.adamsandsonplumbing.com/how-to-tell-when-its-time-for-a-new-toilet/
Category – Plumbing