What Homeowners Need to Know

Amazing! What Homeowners Need to Know

Information about What Homeowners Need to Know

Phil Puccio

When your property becomes a contractor’s construction site, safety is a top priority and the safety of the roof is paramount. According to OSHA, “Roof falls accounted for nearly 1,200 or 34% of deaths from falls during this period (from 2003 to 2013).” To avoid falls and other injuries, roofers should include safety planning in the scope of any roofing job.

Roof security: PLAN – PROVIDE – TRAIN

OSHA summarizes its standard roofing safety practices as “PLAN – PROVIDE – TRAIN”. This means:

  • Roofers need to plan ahead to get the job done safely: Roofers need to develop a plan for each construction site to ensure that the right equipment, materials and appropriately trained workforce are available. This includes knowing the roof pitch and following the appropriate standard for a low or steep roof.
  • Roofers must “OFFER” the right equipment: Roofers need to provide fall protection and the right equipment for the job, including the right types of ladders, scaffolding, and safety equipment.
  • Roofers must “TRAIN” workers to use the equipment safely: Roofers must train workers to identify hazards and to maintain and safely use ladders, scaffolding, fall protection systems, and other equipment they use at work.

Roof safety practice and equipment

The best roofing company is one that is safety focused and aware of the following:

  • Roof integrity: Prior to installation, the roofer must determine the overall structural integrity of the roof and take all necessary precautions to protect workers before starting work. If there is any visible rot or holes in the roof, the underlying structure must be examined. In some cases, trusses and / or decking may need to be replaced to stabilize the roof before the roof system can be repaired or replaced. In addition, the installation must take into account the location and condition of the skylights.
  • Ladder Safety & Placement: Experienced roofers have the right ladder lengths so that the ladders can be placed at safe angles around the house. In addition, they pay particular attention to the fact that the ladder is standing securely and that the upper part is tied to prevent it from slipping or shifting.
  • Safety equipment: Other safety equipment should be used, such as Lifelines).
  • Security Practices: During the demolition phase, the roofer should protect the ground workers from falling debris by controlling how debris leaves the roof. According to OSHA, suitable footwear is an important piece of personal protective equipment and critical of the roof demolition. Injury to a nail or shingle removal tool can cause a worker to lose focus and fall. Workers should also be aware of air hoses and power cords for nail guns and other electrical equipment. If a worker steps on it, hoses and cords can slip under their feet and lead to falls.
  • Correct training: Roofing trade is a learned skill that requires experience to be fully acquired. A good roofer will ensure that all workers are fully trained in these safety practices and update their training as safety standards change and improve. This includes the provision of ongoing, workplace-specific safety training courses as well as general safety training courses for roofers during the entire duration of the employees’ employment.

Not only should you ensure that the roofer you hire sets up and maintains a safe workplace, but you should also ensure that the roofer provides you with proof of liability insurance and workers’ compensation insurance.

The safety-trained roofer inspects and checks the construction site for possible hazards and solves these problems before starting work. During assembly, the roofing company, which is properly training its employees, will require that all roofing safety precautions are taken. After the roof is completed, all tools, nails and debris are properly removed to prevent injury or damage to the car tires. Roofing safety before, during and after work protects the roofer and the homeowner.

At All Weather Tite, the roof safety of all construction sites in Port Charlotte, FL is a top priority and you can be sure that all safety precautions are followed in your home. Contact All Weather Tite for a free roof inspection and estimate. We serve Southwest Florida and the surrounding areas.

  • Venice, FL
  • S Venice, FL
  • Englewood, FL
  • Grove City, FL
  • Rotonda West, FL
  • North Harbor, FL
  • Fort Ogden, Florida
  • Port Charlotte, Florida
  • Punta Gorda, FL
  • Cleveland, Florida


Breaking Story – What Homeowners Need to Know

The Latest News on What Homeowners Need to Know

Original Source: https://allweathertite.com/2018/07/roofing-safety-what-homeowners-need-to-know/
Category – Roofing

Leave a Reply

Your email address will not be published. Required fields are marked *

© 2021 welcometoabode.com - WordPress Theme by WPEnjoy